Power consumption figures will vary with your PSU’s efficiency, ambient operating temperature and accuracy of the power meter.
Power supply unit is not included. You will need ATX PSU with at least 9 six-pin PCIe connectors. There are 2 PCIe connectors for +12V DC input on each hashing board and both have to be connected to the PSU for the hashing board to operate. Do not connect more than one PSU to the same hashing board.
Bitmain Affiliates recommends the new PSU that is especially designed for Antminer L3+.
Separate power supply to control board: there is one additional six-pin PCIe connector on the IO board, which must be connected to the PSU to get power. Be sure to power on the miner only after all 9 PCIe connectors are connected to power supply.
Next Day Shipping! Please select the correct address for shipping before you submit your order because the shipping address cannot be changed after the order has been submitted.
|Chip quantity per unit||288 chips on four hashing boards, 72 chips on one hashing board|
|Chip Type||BM1485 ASIC chip|
|DC Voltage Input||11.60 ~ 13.00V|
|Dimensions||352mm (l) x 130mm (w) x 187.5mm (h)|
|Hash Rate||504MH/s. A variation of +/- 5% is expected.|
|Operating Temperature||0°C - 40°C|
|Power Consumption||800W +10% (at the wall, with Bitmain's APW3 PSU, 93% efficiency, 25°C ambient temperature)|
|Power Efficiency||1.6J/MH +10% (at the wall, with Bitmain's APW3 PSU, 93% efficiency, 25°C ambient temperature)|
- Brands Bitmain
- Product Code: L3+
- Availability: In Stock
$600.00 ( 0.08064906)